Loader View

• This feature is only available when you’re using this device for feeding. If you change your mind about using a device for feeding, log out of the app and select Yes or No when asked if the device will be used for feeding.
• Before you can begin using FeedComp to feed at your dairy, you must complete the required setup. See Before You Begin: Required Setup to learn more about the required setup order.
• Devices used for feeding must be connected to a scale. See Scales to learn more about connecting to your scale.
• Bluetooth must be enabled on both the loader's and the feeder's devices.

1. After the feeding technician connects their device to a mixer and taps Start Mix, tap Feed at the bottom of the screen, and then tap Loader View.
2. Tap Connect Now at the bottom of the screen.
3. Select the feeding technician's device, and then tap Connect at the bottom of the screen.
4. After your device is connected to the feeding technician's device, tap Continue at the bottom of the screen.
5. Load the ingredients into the mixer.

1. Connect to the feeding technician's device.
2. Load the first ingredient for the mix. As you load ingredients, the scale weighs the load and FeedComp calculates the percentage complete. You can Skip or Ignore ingredients if needed. Click here to learn more about skip and ignore features.

   If the weight of an ingredient detected by the scale drops below the threshold set for the mixer while mixing a recipe A combination of ingredients used to make feed for animals, FeedComp displays an alert that requires attention before adding the next ingredient to the mixer. To set the threshold, see Create New Equipment and Edit Equipment. Tap Acknowledge to confirm and record the ingredient's actual amount and continue mixing. Acknowledged ingredients are identified with an ACK icon on the Feeding History Report.

3. If a timer was set for the ingredient, wait for the timer to complete. Or, tap Advance this Ingredient to move to the next step in the recipe.
4. If a time delay was set between ingredients, FeedComp displays a countdown in the middle of the screen for the allotted time. You can tap Skip to immediately move to the next ingredient in the recipe.

Once all of the ingredients are added and the progress bar reaches 100%, FeedComp automatically disconnects your device from the feeding technician's device and returns you to the Home screen. The feeding technician can now .drop the mix at the necessary locations.

Once the loading process is started for a feeding, you can tap Abort at the top middle of the screen to abort the feeding. Feedings started but not completed are identified with an Aborted icon on the Feeding History report.